from ......Internal.Core import Core
from ......Internal.CommandsGroup import CommandsGroup
from ......Internal.StructBase import StructBase
from ......Internal.ArgStruct import ArgStruct
from ...... import repcap
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class Maximum:
"""Maximum commands group definition. 2 total commands, 0 Sub-groups, 2 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._base = CommandsGroup("maximum", core, parent)
# noinspection PyTypeChecker
[docs] class FetchStruct(StructBase):
"""Response structure. Fields: \n
- Reliability: int: decimal 'Reliability Indicator'. In list mode, a zero reliability indicator indicates that the results in all measured segments are valid. A non-zero value indicates that an error occurred in at least one of the measured segments.
- Seg_Reliability: int: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.
- Rpi_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
- Rdc_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
- Rcc_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
- Rea_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
- Rfch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
- Rsch_0_W_02_E_04: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
- Rsch_0_W_01_E_02: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
- Rsch_1_W_06_E_08: float: float For future use - returned value not relevant.
- Rsch_1_W_02_E_04: float: float For future use - returned value not relevant."""
__meta_args_list = [
ArgStruct.scalar_int('Reliability', 'Reliability'),
ArgStruct.scalar_int('Seg_Reliability'),
ArgStruct.scalar_float('Rpi_Ch'),
ArgStruct.scalar_float('Rdc_Ch'),
ArgStruct.scalar_float('Rcc_Ch'),
ArgStruct.scalar_float('Rea_Ch'),
ArgStruct.scalar_float('Rfch'),
ArgStruct.scalar_float('Rsch_0_W_02_E_04'),
ArgStruct.scalar_float('Rsch_0_W_01_E_02'),
ArgStruct.scalar_float('Rsch_1_W_06_E_08'),
ArgStruct.scalar_float('Rsch_1_W_02_E_04')]
def __init__(self):
StructBase.__init__(self, self)
self.Reliability: int = None
self.Seg_Reliability: int = None
self.Rpi_Ch: float = None
self.Rdc_Ch: float = None
self.Rcc_Ch: float = None
self.Rea_Ch: float = None
self.Rfch: float = None
self.Rsch_0_W_02_E_04: float = None
self.Rsch_0_W_01_E_02: float = None
self.Rsch_1_W_06_E_08: float = None
self.Rsch_1_W_02_E_04: float = None
[docs] def fetch(self, segment=repcap.Segment.Default) -> FetchStruct:
"""SCPI: FETCh:CDMA:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:CP:MAXimum \n
Snippet: value: FetchStruct = driver.multiEval.listPy.segment.cp.maximum.fetch(segment = repcap.Segment.Default) \n
Returns channel power (CP) results for the segment <no> in list mode (see method RsCmwCdma2kMeas.Configure.MultiEval.
ListPy.value) . To define the statistical length for AVERage, MAXimum, MINimum calculation and enable the calculation of
the results use the command method RsCmwCdma2kMeas.Configure.MultiEval.ListPy.Segment.Modulation.set.
The values described below are returned by FETCh commands. CALCulate commands return limit check results instead, one
value for each result listed below. \n
:param segment: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Segment')
:return: structure: for return value, see the help for FetchStruct structure arguments."""
segment_cmd_val = self._base.get_repcap_cmd_value(segment, repcap.Segment)
return self._core.io.query_struct(f'FETCh:CDMA:MEASurement<Instance>:MEValuation:LIST:SEGMent{segment_cmd_val}:CP:MAXimum?', self.__class__.FetchStruct())
# noinspection PyTypeChecker
[docs] class CalculateStruct(StructBase):
"""Response structure. Fields: \n
- Reliability: int: decimal 'Reliability Indicator'. In list mode, a zero reliability indicator indicates that the results in all measured segments are valid. A non-zero value indicates that an error occurred in at least one of the measured segments.
- Seg_Reliability: int: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.
- Rpi_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
- Rdc_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
- Rcc_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
- Rea_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
- Rfch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
- Rsch_0_W_02_E_04: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
- Rsch_0_W_01_E_02: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
- Rsch_1_W_06_E_08: float: float For future use - returned value not relevant.
- Rsch_1_W_02_E_04: float: float For future use - returned value not relevant."""
__meta_args_list = [
ArgStruct.scalar_int('Reliability', 'Reliability'),
ArgStruct.scalar_int('Seg_Reliability'),
ArgStruct.scalar_float('Rpi_Ch'),
ArgStruct.scalar_float('Rdc_Ch'),
ArgStruct.scalar_float('Rcc_Ch'),
ArgStruct.scalar_float('Rea_Ch'),
ArgStruct.scalar_float('Rfch'),
ArgStruct.scalar_float('Rsch_0_W_02_E_04'),
ArgStruct.scalar_float('Rsch_0_W_01_E_02'),
ArgStruct.scalar_float('Rsch_1_W_06_E_08'),
ArgStruct.scalar_float('Rsch_1_W_02_E_04')]
def __init__(self):
StructBase.__init__(self, self)
self.Reliability: int = None
self.Seg_Reliability: int = None
self.Rpi_Ch: float = None
self.Rdc_Ch: float = None
self.Rcc_Ch: float = None
self.Rea_Ch: float = None
self.Rfch: float = None
self.Rsch_0_W_02_E_04: float = None
self.Rsch_0_W_01_E_02: float = None
self.Rsch_1_W_06_E_08: float = None
self.Rsch_1_W_02_E_04: float = None
[docs] def calculate(self, segment=repcap.Segment.Default) -> CalculateStruct:
"""SCPI: CALCulate:CDMA:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:CP:MAXimum \n
Snippet: value: CalculateStruct = driver.multiEval.listPy.segment.cp.maximum.calculate(segment = repcap.Segment.Default) \n
Returns channel power (CP) results for the segment <no> in list mode (see method RsCmwCdma2kMeas.Configure.MultiEval.
ListPy.value) . To define the statistical length for AVERage, MAXimum, MINimum calculation and enable the calculation of
the results use the command method RsCmwCdma2kMeas.Configure.MultiEval.ListPy.Segment.Modulation.set.
The values described below are returned by FETCh commands. CALCulate commands return limit check results instead, one
value for each result listed below. \n
:param segment: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Segment')
:return: structure: for return value, see the help for CalculateStruct structure arguments."""
segment_cmd_val = self._base.get_repcap_cmd_value(segment, repcap.Segment)
return self._core.io.query_struct(f'CALCulate:CDMA:MEASurement<Instance>:MEValuation:LIST:SEGMent{segment_cmd_val}:CP:MAXimum?', self.__class__.CalculateStruct())