Current¶
SCPI Commands
FETCh:CDMA:MEASurement<Instance>:MEValuation:LIST:SEGMent<Segment>:CP:CURRent
CALCulate:CDMA:MEASurement<Instance>:MEValuation:LIST:SEGMent<Segment>:CP:CURRent
- class Current[source]
Current commands group definition. 2 total commands, 0 Sub-groups, 2 group commands
- class CalculateStruct[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability Indicator’. In list mode, a zero reliability indicator indicates that the results in all measured segments are valid. A non-zero value indicates that an error occurred in at least one of the measured segments.
Seg_Reliability: int: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.
Rpi_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
Rdc_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
Rcc_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
Rea_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
Rfch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
Rsch_0_W_02_E_04: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
Rsch_0_W_01_E_02: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
Rsch_1_W_06_E_08: float: float For future use - returned value not relevant.
Rsch_1_W_02_E_04: float: float For future use - returned value not relevant.
- class FetchStruct[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability Indicator’. In list mode, a zero reliability indicator indicates that the results in all measured segments are valid. A non-zero value indicates that an error occurred in at least one of the measured segments.
Seg_Reliability: int: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.
Rpi_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
Rdc_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
Rcc_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
Rea_Ch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
Rfch: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
Rsch_0_W_02_E_04: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
Rsch_0_W_01_E_02: float: float RMS channel power values for the indicated channels. Range: -25 dB to 0 dB (SDEViation 0 dB to 25 dB) Unit: dB
Rsch_1_W_06_E_08: float: float For future use - returned value not relevant.
Rsch_1_W_02_E_04: float: float For future use - returned value not relevant.
- calculate(segment=<Segment.Default: -1>) → CalculateStruct[source]
# SCPI: CALCulate:CDMA:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:CP:CURRent value: CalculateStruct = driver.multiEval.listPy.segment.cp.current.calculate(segment = repcap.Segment.Default)
Returns channel power (CP) results for the segment <no> in list mode (see method RsCmwCdma2kMeas.Configure.MultiEval. ListPy.value) . To define the statistical length for AVERage, MAXimum, MINimum calculation and enable the calculation of the results use the command method RsCmwCdma2kMeas.Configure.MultiEval.ListPy.Segment.Modulation.set. The values described below are returned by FETCh commands. CALCulate commands return limit check results instead, one value for each result listed below.
- param segment
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)
- return
structure: for return value, see the help for CalculateStruct structure arguments.
- fetch(segment=<Segment.Default: -1>) → FetchStruct[source]
# SCPI: FETCh:CDMA:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:CP:CURRent value: FetchStruct = driver.multiEval.listPy.segment.cp.current.fetch(segment = repcap.Segment.Default)
Returns channel power (CP) results for the segment <no> in list mode (see method RsCmwCdma2kMeas.Configure.MultiEval. ListPy.value) . To define the statistical length for AVERage, MAXimum, MINimum calculation and enable the calculation of the results use the command method RsCmwCdma2kMeas.Configure.MultiEval.ListPy.Segment.Modulation.set. The values described below are returned by FETCh commands. CALCulate commands return limit check results instead, one value for each result listed below.
- param segment
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)
- return
structure: for return value, see the help for FetchStruct structure arguments.