Acp¶

SCPI Commands

CONFigure:CDMA:MEASurement<Instance>:MEValuation:ACP:FOFFsets
CONFigure:CDMA:MEASurement<Instance>:MEValuation:ACP:RBW

class Acp[source]

Acp commands group definition. 4 total commands, 1 Sub-groups, 2 group commands

get_foffsets() → List[float][source]

# SCPI: CONFigure:CDMA:MEASurement<Instance>:MEValuation:ACP:FOFFsets
value: List[float or bool] = driver.configure.multiEval.acp.get_foffsets()

Defines the frequency offsets to be used for ACP measurements. The offsets are defined relative to the analyzer frequency. Up to 10 offsets can be defined and enabled.

return

frequency_offset: No help available

get_rbw() → List[RsCmwCdma2kMeas.enums.Rbw][source]

# SCPI: CONFigure:CDMA:MEASurement<Instance>:MEValuation:ACP:RBW
value: List[enums.Rbw] = driver.configure.multiEval.acp.get_rbw()

Defines the resolution bandwidth to be used for the upper and lower frequency offsets 0 to 9 of ACP measurements.

return

rbw: F1K0 | F6K25 | F10K | F12K5 | F25K | F30K | F50K | F100k | F1M0 | F1M23 F1K0: 1 kHz F6K25: 6.25 kHz F10K: 10 kHz F12K5: 12.5 kHz F25K: 25 kHz F30K: 30 kHz F50K: 50 kHz F100k: 100 kHz F1M0: 1 MHz F1M23: 1.23 MHz

set_foffsets(frequency_offset: List[float]) → None[source]

# SCPI: CONFigure:CDMA:MEASurement<Instance>:MEValuation:ACP:FOFFsets
driver.configure.multiEval.acp.set_foffsets(frequency_offset = [1.1, True, 2.2, False, 3.3])

Defines the frequency offsets to be used for ACP measurements. The offsets are defined relative to the analyzer frequency. Up to 10 offsets can be defined and enabled.

param frequency_offset

numeric | OFF | ON Range: 0 MHz to 4 MHz, Unit: MHz Additional parameters: OFF | ON (disables the offset | enables the offset using the previous defined value)

set_rbw(rbw: List[RsCmwCdma2kMeas.enums.Rbw]) → None[source]

# SCPI: CONFigure:CDMA:MEASurement<Instance>:MEValuation:ACP:RBW
driver.configure.multiEval.acp.set_rbw(rbw = [Rbw.F100k, Rbw.F6K25])

Defines the resolution bandwidth to be used for the upper and lower frequency offsets 0 to 9 of ACP measurements.

param rbw

F1K0 | F6K25 | F10K | F12K5 | F25K | F30K | F50K | F100k | F1M0 | F1M23 F1K0: 1 kHz F6K25: 6.25 kHz F10K: 10 kHz F12K5: 12.5 kHz F25K: 25 kHz F30K: 30 kHz F50K: 50 kHz F100k: 100 kHz F1M0: 1 MHz F1M23: 1.23 MHz

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.multiEval.acp.clone()

Subgroups

Extended