Extended¶

SCPI Commands

CONFigure:CDMA:MEASurement<Instance>:MEValuation:ACP:EXTended:FOFFsets
CONFigure:CDMA:MEASurement<Instance>:MEValuation:ACP:EXTended:RBW

class Extended[source]

Extended commands group definition. 2 total commands, 0 Sub-groups, 2 group commands

get_foffsets() → List[float][source]

# SCPI: CONFigure:CDMA:MEASurement<Instance>:MEValuation:ACP:EXTended:FOFFsets
value: List[float or bool] = driver.configure.multiEval.acp.extended.get_foffsets()

Defines the frequency offsets to be used for extended ACP measurements. The offsets are defined relative to the analyzer frequency. Up to 20 offsets can be defined and enabled.

return

frequency_offset: Range: 0 MHz to 4 MHz Additional parameters: OFF | ON (disables | enables the offset)

get_rbw() → List[RsCmwCdma2kMeas.enums.Rbw][source]

# SCPI: CONFigure:CDMA:MEASurement<Instance>:MEValuation:ACP:EXTended:RBW
value: List[enums.Rbw] = driver.configure.multiEval.acp.extended.get_rbw()

Defines the resolution bandwidth to be used for the upper and lower frequency offsets 0 to 19 of extended ACP measurements.

return

rbw: F1K0 | F6K25 | F10K | F12K5 | F25K | F30K | F50K | F100k | F1M0 | F1M23 F1K0: 1 kHz F6K25: 6.25 kHz F10K: 10 kHz F12K5: 12.5 kHz F25K: 25 kHz F30K: 30 kHz F50K: 50 kHz F100k: 100 kHz F1M0: 1 MHz F1M23: 1.23 MHz

set_foffsets(frequency_offset: List[float]) → None[source]

# SCPI: CONFigure:CDMA:MEASurement<Instance>:MEValuation:ACP:EXTended:FOFFsets
driver.configure.multiEval.acp.extended.set_foffsets(frequency_offset = [1.1, True, 2.2, False, 3.3])

Defines the frequency offsets to be used for extended ACP measurements. The offsets are defined relative to the analyzer frequency. Up to 20 offsets can be defined and enabled.

param frequency_offset

Range: 0 MHz to 4 MHz Additional parameters: OFF | ON (disables | enables the offset)

set_rbw(rbw: List[RsCmwCdma2kMeas.enums.Rbw]) → None[source]

# SCPI: CONFigure:CDMA:MEASurement<Instance>:MEValuation:ACP:EXTended:RBW
driver.configure.multiEval.acp.extended.set_rbw(rbw = [Rbw.F100k, Rbw.F6K25])

Defines the resolution bandwidth to be used for the upper and lower frequency offsets 0 to 19 of extended ACP measurements.

param rbw

F1K0 | F6K25 | F10K | F12K5 | F25K | F30K | F50K | F100k | F1M0 | F1M23 F1K0: 1 kHz F6K25: 6.25 kHz F10K: 10 kHz F12K5: 12.5 kHz F25K: 25 kHz F30K: 30 kHz F50K: 50 kHz F100k: 100 kHz F1M0: 1 MHz F1M23: 1.23 MHz